Thruster BOWA0761 76kgf 12V tunnel Dia.185mm

AED 18,984.00 Excl. tax

Stock Status: In stock

EEPN 06.07.0084 | OEM BOWA0761

Download Document

document-text

Description

Thruster BOWA0761 76kgf 12V tunnel Dia.185mm Optimal tunnel length is 370-740mm Maximum tunnel length is 1110mm both the measurements taken at bottom end of the tunnel.

Bow thruster proportional brushless 76 kgf, 12V in 185mm tunnel with extended run time

Vetus BOW PRO thrusters use proven induction motors without carbon brushes. 
As a result, the bow thruster motor is maintenance-free and has Endurance Rated* run-time! 
Just the tailpiece and the power circuits need regular maintenance. 
The induction motor is controlled by the VETUS MCV motor controller. 
This in-house-engineered motor controller can handle both 12 V or 24 V board systems, 
making the new BOW PRO thruster suitable for almost all boats. 
The built-in over-temp and low battery protection, 
combined with the brushless induction motor make the BOW PRO thruster 
series highly resistent to abuse and ideal for even the most inexperienced boater!
BOW PRO thruster is controlled by proprietary CANBUS protocol (digital control). 
There are two fully-proportional panels available for the thruster series; 
one basicpanel(BPPPA) and one panel with lock-and-hold function for easy docking (BPPJA). 
BOW PRO thrusters utilize same propellers and gearboxes proven in VETUS thrusters for over 30 years. 
Upgrading a boat with an existing thruster to a BOW PRO thrust easily accommodated as the Bow Pro thruster 
was made to share tunnel sizes with current VETUS thrusters as well as many other brands.

 

cog

General Specification

Part number 06.07.0084
Model BOWA0761
Thrust in N (kgf) (power output) 760 (76)
Power kW 3.1
Brushless induction motor ✓
Tunnel diameter, internal, mm 185
Weight excl. tunnel, in kg 35
For DC Systems, Volt 12
Current consumption, Amps. 322
Operating time:
• continuously at maximum thrust, in minutes
• at reduced thrust

5
Endurance rated
Main fuse ZE355 (355 Amps)
Batteries 12 Volt D.C., min. Ah 1 x 125
Battery main switch, model BATSW 250
Press to skip carousel

More from Vetus

Cleat TAURUS05 SS316 300 mm 2470kgf safe working load
In stock
AED 507.00
EEPN 11.02.0005 OEM TAURUS05
Hose Ventilation IDxOD 180x186mm price of 1 meter
In stock
AED 351.00
EEPN 05.09.0107 OEM VHOSE178
Tank Diesel/Fresh/Waste water 137 L
In stock
AED 1,286.00
EEPN 04.03.0098 OEM ATANK137
Ventilator extraction TWINLINEC 24V in-line Dia. 76 mm 5 m3/min (axial type)
In stock
AED 302.00
EEPN 05.05.1198 OEM TWINLINEC
Seat folding CHCS moulded without upholstery
In stock
Special Price AED 163.15
35% OFF |
Regular Price AED 251.00
EEPN 07.01.0012 OEM CHCS
Seat folding CHCS moulded without upholstery
Level sender fuel FSENSOR 12/24V with float arm
In stock
AED 258.00
EEPN 10.09.0005 OEM FSENSOR
Data cable CAN-bus 3 m
In stock
AED 278.00
EEPN 02.08.0284 OEM DTCAN3M
Loading...

Adding to Wish List...