Thruster Bow PRO 30 kgf 12V tunnel Dia.110mm

AED 13,156.00 Excl. tax

Stock Status: Out of stock

EEPN 06.07.0076 | OEM BOWA0301

Download Document

document-text

Description

Thruster Bow PRO 30 kgf 12V tunnel Dia.110mm Optimal tunnel length is 220-440mm Maximum tunnel length is 660mm both the measurements taken at bottom end of the tunnel.

Bow thruster brushless 30 kgf, 12V in 110mm tunnel with extended run time.

Revolution: The BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has unlimited* runtime! The induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12 V and 24 V, making the new bow thruster suitable for almost all boats!
Evolution: The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster therefore is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.

  • Reliable & proportional control
  • Unlimited* run-time
  • Brushless (no maintenance & ignition protected)
  • Hold-function for easy docking
  • Highly efficient (up to 93%)
  • Safe & Easy to install
  • Backwards compatible: easily upgrade existing Vetus C & D series bow thrusters
  • THE solution for charter boats
  • More of these revolutionary models will follow shortly!

(*) The only limitation is the size of your battery bank.

cog

General Specification

Part number 06.07.0076
Model BOWA0301
Thrust in N (kgf) (power output) 300 (30)
Power kW 1.6
Brushless induction motor ✓
Tunnel diameter, internal, mm 110
Weight excl. tunnel, in kg 24
For DC Systems, Volt 12
Current consumption, Amps. 174
Operating time:
• continuously at maximum thrust, in minutes
• at reduced thrust

10
Endurance rated
Main fuse ZE250 (250 Amps)
Batteries 12 Volt D.C., min. Ah 1 x 85
Battery main switch, model BATSW 250
Press to skip carousel

More from Vetus

Thruster Bow 55 kgf 12V tunnel Dia.150mm
In stock
AED 8,548.00
EEPN 06.07.0027 OEM BOW5512D
SIHOSE25 Silicone Hose – 25mm ID x 35mm OD – Sold per Metre
In stock
AED 273.00
EEPN 04.12.0089 OEM SIHOSE25
WWHOSE38B Grey Waste Water Hose – 38mm ID x 47mm OD – Sold per Metre
In stock
AED 46.00
EEPN 04.12.0047 OEM WWHOSE38B
SLANG30 Rubber Exhaust Hose – 30mm ID x 38mm OD – Sold per Metre
In stock
AED 143.00
EEPN 04.12.0019 OEM SLANG30
SAHOSE19 Sanitary Toilet Waste Hose – 19mm ID x 29mm OD – Sold per Metre
In stock
AED 92.00
EEPN 04.12.0050 OEM SAHOSE19
Hatch Escape ALTUS ALTR520SL round cut-out Dia. 518 mm CE certified A2
In stock
AED 3,131.00
EEPN 05.07.0009 OEM ALTR520SL
Battery AGM 140Ah 12V
In stock
AED 1,998.00
EEPN 08.02.0048 OEM VEAGM140
Loading...

Adding to Wish List...