Pump waste (RunDry macerator) 12V (18590 series)

AED 977.00 Excl. tax

Stock Status: Out of stock

EEPN 04.14.0025 | OEM 18590-2092

Download Document

document-text

Description

WASTE EVACUATION

The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self-priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation

It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued buildup of sediment in the tank which could cause a potential blockage.

FISH BOX AND LIVEWELL TANK EVACUATION

The Jabsco Macerator Pump is the ideal pump for the emptying of fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.

Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed by the Jabsco Macerator Pump, and the self-priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.

cog

General Specification

18590-2092 Macerator pump 12V dc

  • Connections: - for 38mm (1½”) bore inlet hose, 25mm (1”) bore discharge hose
  • Dimensions: - 290mm long, 120mm wide, 95mm high
  • Fuse Size: - 20(amp)
  • Output: - up to 43 litres/minute (9 gallons/minute) at 3m total head. Maximum recommended total head 6m
  • Compact toilet waste macerator pump
  • 15 minute rated, for use with waste holding tanks up to 900 litres (200 gallons) capacity
  • Grinds raw toilet waste to a uniform slurry for easy transfer and discharge
  • Self-priming up to 0.6m vertical lift
  • Fully sealed motor with Dry-Run protection device
  • Heavy duty 4 blade chopper
  • Packaged Dimensions: L:30.00 x H:9.00 x W:13.00cm
  • Actual Weight: 2.19 Kg  (Approx. 2.69 Kg packed)
Press to skip carousel

More from Jabsco

Pump clutch 1B pulley 12V 21 Gpm BSP port Bronze body for bilge & deckwash application
In stock
Special Price AED 3,734.25
35% OFF |
Regular Price AED 5,745.00
EEPN 04.16.0172 OEM 50580-2201
Pump clutch 1B pulley 12V 21 Gpm BSP port Bronze body for bilge & deckwash application
Strainer 90 deg. plugin & 1/2"-14 thread with #40 SS mesh for water pressure system
In stock
AED 139.00
EEPN 04.21.0086 OEM 46400-0014
Impeller Q neoprene drive5 blade12 Dia. 95 mm 88.9 mm wide shaft Dia. 25.4 mm plastic insert with grease & gasket (display pack)
In stock
AED 976.00
EEPN 04.23.0057 OEM 17370-0001-P
Impeller Q neoprene drive 7 W 63 mm blade 12 Dia. 95 mm shaft Dia. 25.4 mm Brass insert (Box pack)
In stock
AED 288.00
EEPN 04.23.0058 OEM 17935-0001-P
Impeller Flexible Neoprene Type U Drive Type 7 13 Blade Dia. 127mm Width 101.6mm Shaft Dia. 38mm Brass Insert
In stock
Special Price AED 1,787.50
50% OFF |
Regular Price AED 3,575.00
EEPN 04.23.0064 OEM 2999-0001
Impeller Flexible Neoprene Type U Drive Type 7 13 Blade Dia. 127mm Width 101.6mm Shaft Dia. 38mm Brass Insert
Toilet Compact 24V
In stock
AED 2,179.00
EEPN 04.01.0135 OEM 37010-3094
Pump PARMax HD5 5GPM 12V 60PSI
In stock
AED 1,181.00
EEPN 04.21.0144 OEM P501J-118S-3A
Loading...

Adding to Wish List...