Pump 12V DC NPT model fuse 25A

Jabsco
AED 2,058.00 Excl. tax

Stock Status: Out of stock

EEPN 04.16.0142 | OEM 23920-9213
Pump utility puppy 11.3 Gpm 24 V NPT 3000 series
Pump utility puppy 11.3 Gpm 24 V NPT 3000 series
EEPN: 04.16.0910
AED 3,838.00
Out of Stock
Pump utility puppy 11.3 Gpm 24 V BSP 3000 series
Pump utility puppy 11.3 Gpm 24 V BSP 3000 series
EEPN: 04.16.0908
AED 1,851.00
Out of Stock
Pump utility puppy 11.3 Gpm 12 V NPT 3000 series
Pump utility puppy 11.3 Gpm 12 V NPT 3000 series
EEPN: 04.16.0909
AED 3,489.00
Out of Stock
Pump utility puppy 11.3 Gpm 12 V BSP 3000 series
Pump utility puppy 11.3 Gpm 12 V BSP 3000 series
EEPN: 04.16.0907
AED 3,838.00
Out of Stock
document-text

Description

  • The Jabsco 23920-9213 is a bronze Flexible Impeller pump with a Nitrile Impeller, Mechanical seal, 3/4 Inch NPT Threaded Ports, coupled to a 12 Volt DC Motor.
  • This pump is rated for 11.33 GPM (43 LPM) output at 10 feet (3m) total head, and is self-priming up to 8 feet (2.4m) of vertical lift.
  • This pump also features a Mechanical seal for extra long life.
  • The continuous rated heavy-duty Utility Puppy 3000 offers very high flow for bilge, deck wash and general purpose use, and ten minutes dry running.
  • The pump is designed to be powered from fully charged batteries or other DC supply with adequate amperage provision.
  • Pump connections are 3/4 Inch NPT thread, with the pump being designed to operate with 1 Inch reinforced hose.
  • The dry running feature means the pump is not reversible, the discharge being the vertical port.
  • The Nitrile impeller supplied in pump is recommended for liquid temperatures of 50 degrees - 180 degrees F (10 degrees - 82.2 degrees C).
  • Do not restrict the inlet pipework as these flexible impeller pumps can handle solids so strainers are not generally recommended.
  • Hard and soft Solids handling should present little or no problem for the pump with solids size below approximately 6-7mm.
cog

General Specification

No specifications available.

Press to skip carousel

More from Jabsco

Floodlight Xenon HID Bracket Mount 12V DC
In stock
Jabsco
Floodlight Xenon HID Bracket Mount 12V DC
Special Price AED 2,800.00
50% OFF |
Regular Price AED 5,600.00
EEPN 09.06.0012 OEM 63142-0012
Floodlight Xenon HID Bracket Mount 12V DC
Impeller Flexible Neoprene Type G Drive Type 3 6 Blade Dia. 51mm Width 22mm Shaft Dia. 12.7mm Brass Insert
In stock
Jabsco
Impeller Flexible Neoprene Type G Drive Type 3 6 Blade Dia. 51mm Width 22mm Shaft Dia. 12.7mm Brass Insert
Special Price AED 233.00
50% OFF |
Regular Price AED 466.00
EEPN 04.23.0024 OEM 22799-0001-P
Impeller Flexible Neoprene Type G Drive Type 3 6 Blade Dia. 51mm Width 22mm Shaft Dia. 12.7mm Brass Insert
Impeller K neoprene drive 7 W 31.5 mm blade 12 Dia. 57 mm shaft Dia.16 mm Brass insert (display pack)
In stock
Jabsco
Impeller K neoprene drive 7 W 31.5 mm blade 12 Dia. 57 mm shaft Dia.16 mm Brass insert (display pack)
AED 175.00
EEPN 04.23.0034 OEM 1210-0001-P
Impeller Z neoprene drive5 blade10 Dia. 77 mm 76.2 mm wide shaft Dia. 20 mm Brass insert without grease & gasket (box pack)
In stock
Jabsco
Impeller Z neoprene drive5 blade10 Dia. 77 mm 76.2 mm wide shaft Dia. 20 mm Brass insert without grease & gasket (box pack)
AED 613.00
EEPN 04.23.0072 OEM 30919-0001
Switch panel 3way 12/24/32V for bilge pump
In stock
Jabsco
Switch panel 3way 12/24/32V for bilge pump
AED 201.00
EEPN 04.16.0066 OEM 45
Impeller G nitrile drive 4 blade 6 Dia. 51 mm 22 mm wide shaft Dia. 8 mm plastic insert (display pack)
In stock
Jabsco
Impeller G nitrile drive 4 blade 6 Dia. 51 mm 22 mm wide shaft Dia. 8 mm plastic insert (display pack)
AED 248.00
EEPN 04.23.0023 OEM 7273-0003-P
Impeller I neoprene drive1 blade10 Dia. 51 mm 22 mm wide shaft Dia. 12 mm Brass insert with grease, gasket & O ring (display pack)
In stock
Jabsco
Impeller I neoprene drive1 blade10 Dia. 51 mm 22 mm wide shaft Dia. 12 mm Brass insert with grease, gasket & O ring (display pack)
AED 332.00
EEPN 04.23.0031 OEM 18653-0001-P
View more about Floodlight Xenon HID Bracket Mount 12V DC View more about Impeller Flexible Neoprene Type G Drive Type 3 6 Blade Dia. 51mm Width 22mm Shaft Dia. 12.7mm Brass Insert View more about Impeller K neoprene drive 7 W 31.5 mm blade 12 Dia. 57 mm shaft Dia.16 mm Brass insert (display pack) View more about Impeller Z neoprene drive5 blade10 Dia. 77 mm 76.2 mm wide shaft Dia. 20 mm Brass insert without grease & gasket (box pack) View more about Switch panel 3way 12/24/32V for bilge pump View more about Impeller G nitrile drive 4 blade 6 Dia. 51 mm 22 mm wide shaft Dia. 8 mm plastic insert (display pack) View more about Impeller I neoprene drive1 blade10 Dia. 51 mm 22 mm wide shaft Dia. 12 mm Brass insert with grease, gasket & O ring (display pack)
Loading...

Adding to Wish List...