Anti-fouling Tuff Stuff primer Grey (1 gallon primer + 1 gallon catalyst)
Stock Status: In stock
Note: Only quantities are available in stock. Currently out of stock. Please request a quote.
Download Document
Description
Tuff Stuff is extremely effective for blister prevention on fiberglass, or as a bilge coating because it is resistant to oil and water. As a universal primer, it can be used for corrosion protection on most metals below the waterline, and for priming any metal. Tuff Stuff creates an overlapping barrier to eliminate any direct path for water migration.
Application controls
Method: Airless spray, conventional spray, solvent resistant rollers and brushes.
General Specification
Colors: Light Gray-1284
Finish/Sheen: Matte
Volume Solids: 52% +- 2%
Available Sizes: 1/2-Gallon Kit (2 quarts), 2-Gallon Kit (2 gallons)
Shipping Weight: 22 Lbs./2 Gallon Kit
Mix Ratio: 1:1 Side A, Side C
Induction Time: 20-30 minutes
Flash Point: 80° F
VOC: 444 Grams/Liter
Typical Film Thickness: 6-7.5 mils dry film thickness (DFT) per coat, (11.5-14.5 mils wet film thickness (WFT)
Recommended Coats: 2-4 depending on intended service
Theoretical Coverage: 140 Sq.Ft./Gal. @ 6.0 mils DFT
APPLICATION DETAILS:
Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes.
Dry Times and Overcoating Intervals:
| Substrate Temp. | Touch Dry | Recoating With Tuff Stuff | Overcoating With Bottom Paint | |
| Temp F˚ (C˚) | Min | Min | Max | Min |
| 73˚F (23˚C) | 2 hours | 3 hours | 6 days | 24 hours |
