Anti-fouling Tackcoat primer Yellow (1 gallon primer + 1 gallon catalyst)
Stock Status: In stock
Note: Only quantities are available in stock. Currently out of stock. Please request a quote.
Description
S-76 Tack Coat Primer is for use on properly prepared steel, aluminium or galvanized steel. S-76 is an anticorrosive strontium chromate base primer that is specifically designed for under water metal surfaces including hulls, running gear, and the lower units of outboards and I/O’s. It provides an excellent barrier to reduce pitting of the metal from galvanic corrosion. S-76 should be used in conjunction with another primer such as Tuff Stuff prior to applying antifoulant/topcoat.
Application controls
Method : Brush, roller or spray
Induction/ Sweat-in Time : 30 minutes
Pot Life : 3 hours
General Specification
| Overcoating Interval - Drying Time (Hrs) | ||
| Substrate temp. | Touch Min Max . | Launch minimum |
| 73°F (23°C) | 4 hours 6 hours 8 hours | N/A |
| Product Information | |
| Colour | Light Yellow |
| Finish/Sheen | Flat |
| Converter | 1:1 S-76, S-76C |
| Copper Content | N/A |
| Volume Solids | 46% |
| Mix Ratio | 1:01 |
| Shipping Weight | 22.03 lbs./Gal. |
| Flash Point | 60° F |
| VOC | 448 Grams/Liter |
| Film Thickness | 2.2 mils wet equals 1 mil dry per coat |
| Recommended Coats | 2 |
| Theoretical Coverage | 741 Sq.Ft./Gal. @ recommended film thickness |
| Application data | |
| Brush | China Bristle |
| Roller | Solvent Resistant Roller Cover 3⁄8” pile smooth to medium. Prewash Roller Cover to remove loose fibers prior to use. |
| Airless spray | Minimum 33:1 ratio pump; 2 GPM “0.017-0.026” orifice tip; 3⁄8” ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. |
| Safety | Prior to use, obtain and consult the “Material Safety Data Sheet” of this product for health and safety information. Read and observe all precautionary notices on container labels |
