Woodfinish Gloss 500 ml
Stock Status: Out of stock
Note: Only quantities are available in stock. Currently out of stock. Please request a quote.
Description
A clear, high gloss varnish-like finish with excellent adhesion to new teak and other exotic woods. For use where a glossy, varnished look is desired. Sanding between coats is not required when the next coat is applied within 72 hours. To be used on teakwood, iroco and as an alternative for continuous maintenance of wood oil systems, for interior and exterior work above the waterline in both fresh and salt water environments. When applied on non-oily wood that does not need to “breath” a minimum of 8-10 coats is required. Not suited on bankirai.
Thinner : Brush application - Epifanes brush thinner for paint & varnish.
Spray application - Epifanes spray thinner for paint & varnish.
Recoatable : After 24 hours at 18°C (65°F.). No sanding required if recoated within 72 hours.
Coverage : One liter is sufficient for 12 m² (130 ft²).
General Specification
| System on oily and resinous woods (i.e. teak) | ||
| Coats | First | 4 more |
| Product | Epifanes WFG | Epifanes WFG |
| Thinner | Thinner P&V | Thinner P&V |
| Thinning Ratio % | 25 | 0-5 |
| Drying Time hrs | 24 at 65F | 24 at 65F |
| Abrasive if desired | 320 | 400 |
| Abrasive Type | Dry | Wet or dry |
| Coverage/liter | 130 sq. feet | 130 sq. feet |
| Remarks | Next coat within 72 hours does not need sanding. | |
| System on non-oily and non-resinous woods | ||||
| Coats | First | Second | Third | At least 4 more |
| Product | Epifanes WFG | Epifanes WFG | Epifanes WFG | Epifanes WFG |
| Thinner | Thinner P&V | Thinner P&V | Thinner P&V | Thinner P&V |
| Thinning Ratio % | 50 | 25 | 15 | 0-5 |
| Drying Time hrs | 24 at 65F. | 24 at 65F. | 24 at 65F. | 24 at 65F. |
| Abrasive if desired | 220 | 280 | 280 | 400 |
| Abrasive type | Dry | Dry | Wet or Dry | Wet or Dry |
| Coverage/liter | 200-250 sq. feet | 160-200 sq. feet | 130-160 sq. feet | 130 sq. feet |
| Remarks | Next coat within 72 hours does not need sanding. | |||
Maintenance:
If the existing coats of Wood Finish gloss are intact and only a degrease of gloss is noticed, one or more coats may be applied on a well cleaned, degreased and sanded surface.
Prepare the surface with 320 grit wet or dry abrasive paper. For the annual maintenance of Wood Finish Gloss over non-oily woods, apply a minimum of one or two coats, on a well cleaned, degreased and sanded surface.
More from Epifanes
