Varnish Rubbed Effect 1L
Stock Status: In stock
Note: Only quantities are available in stock. Currently out of stock. Please request a quote.
Description
A quick drying, clear, one-component, interior satin finish, based on a poly-urethane/alkyd resin. This interior finish gives superior protection against alcohol and other aggressive household chemicals. Apply as a finish coat over several build-up coats of Epifanes clear gloss varnish.
Thinner : Brush application - Epifanes brush thinner for paint & varnish.
Spray application - Epifanes spray thinner for paint & varnish.
Recoatable : After 12 hours at 18°C (65°F.).
Coverage : One liter is sufficient for 13 m² (140 ft²).
General Specification
| Coats | First | Second |
| Product | Rubbed Effect Interior Varnish | Rubbed Effect Interior Varnish |
| Thinner | Brush Thinner P&V | Brush Thinner P&V |
| Thinning Ratio % | 0-5 | 0-5 |
| Drying Time hrs | 12 at 65F/18C | 12 at 65F/18C |
| Abrasive paper grit | 320 - 400 | 400 |
| Abrasive type | Wet or Dry | Wet or dry |
| Coverage/liter | 140 sq. feet | 140 sq. feet |
| Remarks | Always stir | Always stir |
Maintenance:
If existing coats of varnish are intact, one or more coats of Epifanes Rubbed Effect Interior Varnish may be applied on a well cleaned, degreased and lightly sanded surface.
An existing varnish system in poor condition must be removed. Weathered spots may be treated with a cleaning or bleaching product.
If either are used, wash down the surface thoroughly with fresh water in order to remove any residue. Allow the surface to dry.
Smaller spots needing repair may be filled with several coats of varnish.
When an equal level has been achieved, sand to a smooth surface and apply one or more coats of Rubbed Effect Varnish on the entire surface.
More from Epifanes
